banner
LIST OF PAPERS PRESENTED

Fluid Machinery (TM)

AICFM_TM_002

Jaymin Desai, Vishal Chauhan  Shahil Charnia, and Kiran Patel

Validation of hydraulic design of a metallic volute centrifugal pump using CFD.

AICFM_TM_003

Lal Gopal Das, Manoj Kumar Rawat, and Nakul Kuri

Flow analysis of a centrifugal slurry pump while handling clear water at design and off-design conditions.

AICFM_TM_007

Jie Zhang, Kun Li, Zhao-Shan Wu.

Numerical study of flow within the wedge like gap of hydrostatic mechanical face seal.

AICFM_TM_008

Lal Gopal Das, Naresh Chandra Murmu

A Unified Design Methodology for Micro Gas Turbine.

AICFM_TM_009

Li Xiao’ou,
Sheng Yetao

Research on main shaft seal of aerator and design of floating end face seal

AICFM_TM_010

Ryo Matsumoto, Shigeya Nagasaka; Jiro Funaki; Katsuya Hirata

Aspect-ratio effects and unsteady-pressure measurements inside a cross-flow impeller.

AICFM_TM_011

Sung-Woo Son

Effect of the Inlet Nozzle Shape on the Performance of a Cross-Flow Type Small Hydropower Turbine.

AICFM_TM_012

Sung-Woo Son

Internal Flow Analysis on a Micro Cross-Flow Type Hydro Turbine at Very Low Specific Speed Range.

AICFM_TM_013

Kai Shimokawa, Akinori Furukawa; Kusuo Okuma; Daisuke Matsushita; Satoshi Watanabe

Experimental Study on Adjustment of Inlet Nozzle Section to Flow Rate Variation for Darrieus-type Hydro Turbine.

AICFM_TM_014

Kazuyuki Nakamura, Kaneo Sugishita; Masayoshi Tsuji

Rehabilitation of Middle Head Kaplan Turbine by CFD analysis.

AICFM_TM_015

Kiran Patel, Jaymin Desai;Vishal Chauhan;Shahil Charania.

Development of Francis Turbine using computational fluid dynamics.

AICFM_TM_016

Kiran Patel, Jaymin Desai;Vishal Chauhan;Shahil Charania.

Evaluation of Hydro Turbine design by Computational Fluid Dynamics

AICFM_TM_017

Kiran Patel, Jaymin Desai;Vishal Chauhan;Shahil Charania.

Evaluation of Hydro Turbine Forebay using CFD.

AICFM_TM_018

Sadao Kurosawa,Kazauyuki Nakamura, Pan Wei

Sand Erosion Prediction for Hydraulic Turbine Runner.

AICFM_TM_019

Snheal Nimje; Uttam Keripale; John Joseph;A M Pradeep; Bhaskar Roy

Design, CFD Analysis of High Hub-to-Tip Ratio Compressor blade at Low Speed.

AICFM_TM_020

T Manoj Kumar Dundi;  N Sitaram;M Suresh

Application of Gurney Flaps on a Centrifugal Fan Impeller.

AICFM_TM_021

Ryusuke Numakura

Design of a two-stage centrifugal compressor for small-size turbo machinery.

AICFM_TM_022

S V Ramana Murthy;Sharad Kapil; David John;  R Ganesh; T.V.Krishnaiah; Dr. S Kishore Kumar

Unsteady flow interaction between stator and rotor of a low pressure turnine stage using 3D CFD.

AICFM_TM_025

Joo-Hoon Park, You-Hwan Shin, and Yoon-Pyo Lee

Aerodynamic Design and Flow Analysis of Propane Turbo-Compressor.

AICFM_TM_026

Priyono Sutikno; Verdy A; Koehuan

Aerodynamic Design and Analysis of the Wind Turbine Blade Propeller Type with power 50KW.

AICFM_TM_027

Jun-Yong Lee; NakJoon Choi; Jong-Won Lee; Han-Yong Yoon; Young-Do Choi

Shape Design and CFD Analysis on a 1kW-class Horizontal Axis Wind Turbine Blade for Hybrid Power Generation System.

AICFM_TM_028

P Saravanan, M.Prakash; K.M.Parammasivam;Selvi Rajan

Pressure distribution study near the tip of small wind turbine rotor blades.

AICFM_TM_030

Karthik.k; Rajesh kumar; Ramkumar; Seetha Lakshmi; Saravanan.P

Aerodynamic characteristics study of a small Wind Turbine Blade using winglets.

AICFM_TM_031

Yoichi Kinorimasa; Norimasa Shiomi;Toshiaki Setoguchi

Design and experimental studies of Radial-Outflow Type Diagonal Flow Fan.

Fluid Power (FP)

AICFM_FP_001

B.Arul Joth, A.M. Junaid Basha.

Attitude Performance of Gear-box Filter during Flight Maneuvering

AICFM_FP_002

Chandrashekhar Degaonkar

Digital Prototyping for Axial Piston Pump Load Sense Dynamics.

AICFM_FP_007

G.Srinivasan, Dr.A.M. Junaid Basha, M. Senthil Kumar

Design studies and mathematical modeling of hydro-pneumatic suspension for armoured fighting vehicles.

AICFM_FP_008

Nagesh. S, A.M. Junaid Basha

Effects of  Misalignment  of High Speed Flexible Coupling on   the Fighter Aircraft Transmission Characteristics.

AICFM_FP_009

A.S Sharan., Somashekhar S. Hiremath, C. S. Venkatesha.

Numerical Analysis on Torque Motor Dynamics used in Electrohydraulic Servovalve.

AICFM_FP_010

Trimbak Attarde,Mahesh Hundekar

Design of Parking Brake with ferritic nitro-carburized steel pads.

AICFM_FP_011

Zhu Shaoyuan;Wu Huaikun;Yang Heng;Guo Huaizhou.

Economical Design of the Cryogenic Valve Test Device.

Fluid Mechanics (FM)

AICFM_FM_001

A. Venugopal, Amit Agrawal and S.V. Prabhu

Comparison of piezo-sensor and differential wall pressure sensor for vortex flowmeter application.

AICFM_FM_002

Kailash Golecha, T.I.Eldho and S.V.Prabhu

Investigation on the performance of a modified savonius water turbine with single and two deflector plates.

AICFM_FM_003

Liu Dong, Yang Min-guan, Gao Bo and Kim Hyoung-Bum

Effect of different temperature gradient on taylor–couette flow with axial wall slits.

AICFM_FM_004

Arun Ramanathan.S, Prabhu.S, Pradeep Kumar.S, Tamizhvendhan.B,Asad Ahmed. R

Analysis of unsteady aerodynamics on dragonfly using CFD.

AICFM_FM_005

W.T. Kang , K.H. Yu and B.R. Shin

An investigation of surface vortices behavior in pump sump.

AICFM_FM_006

Yong Moon Choi, Woong Kang, Hae Man Choi,  Byung Ro Yoon

Long term stability of electromagnetic flow meter as a reference flow meter.

AICFM_FM_013

Jay B. Desai, Mehul P. Bambhania, Shiva S.Siddala, Hemant B. Mehta, Jyotirmay Banerjee.

Numerical simulation of taylor slug flow in horizontal mini-channel.

AICFM_FM_015

krishnaswamy kumar, K.U.Farande N.S.Thakur

Comparative studies of installation effects on flow measurement accuracy

AICFM_FM_016

Ramakumar Bommisetty, Dhanvantri Joshi and Vighneswara Rao Kollati

Flow Loss in Screens: A Fresh Look at Old Correlation.

AICFM_FM_017

Sunil Chandel

Axisymmetric Slurry Flow Prediction in a Vertical Pipe.

Energy Systems (ES)

AICFM_ES_001

S. K. Reddy,    K. M. Pandey, A. P. Singh

Numerical simulation with к-ε turbulence model for combustion chamber of rocket engines.

AICFM_ES_002

A. P. Singh,  Oveepsa Chakraborty and K. M. Pandey

CFD analysis of cavity based combustion of hydrogen at mach number 1.2.

AICFM_ES_006

ZHAO Yuqiao, Loh Wai Lam, and Lee Thong-See

CFD simulation of a pump with wankel engine geometry.

AICFM_ES_012

Umadevi B., Dinesh P.A. , Indira. R.Rao and C.V. Vinay

The effect of particle drag on convective-diffusive mass transfer in doubly connected regions.

AICFM_ES_013

David Santosh Christopher, Rajesh Khanna; Venkumar

Numerical Investigation on Laminar Flow Due To Sudden Expansion Using Nanofluids..

AICFM_ES_014

Bittagopal Mondal,
Dipankar Chatterjee, Md. Raja

Water Droplet Transport Simulation in Serpentine Gas Flow Channel of PEM Fuel Cell

AICFM_ES_015

Hari Krishnan Kumar S S, R.Velraj; Mrs.Latha Nagendhran; Mr. R.Andrews Sylvanus

Optimization of nose cone angle of the payload fairing of space launch vehicle.

Allied Topics (AT)

AICFM_AT_001

Kui Ming Li, Nanjundan Parthasarathy, Young Kyu Park, Yoon Hwan Choi, Yeon Won Lee

The effect of motion of two floater bodies for optimization of wave energy generation system in ocean.

AICFM_AT_003

Prasad. B. V. S. S. S, Ashok Kumar. M

Computational Investigations of Impingement Heat Transfer on an Effused Concave Surface.

AICFM_AT_005

Sh Gowtham Gudimella, Raju YST

Analytical Determination of Radiated Noise and Acoustic Signature from pipes of an Electro-Hydraulic Weapon Control System.

AICFM_AT_006

Young Kyu Park, Kui Ming Li, Yoon Hwan Chi and Yeon Won Lee

A Study on the Generation of Vortices around a Sump Intake with Multiphase Flow.

AICFM_AT_008

Abdus Samadm, Ramasamy Karthikeshwaran I

Leakage Analysis of Progressive Cavity Pump.

AICFM_AT_009

Vishnu Prasad Sharma;
A. Mani; Kumaraswamy S

Experimental Investigations with Various Nozzles in a Two Phase Flow Jet Pump.

AICFM_AT_011

Yumeto Nishiyama; Takayuki Suzuki; Koichi Yonazawa; Peter Doerfler; Hiroshi Tanaka; Yoshinobu Tsujimoto

Phase Resonance in a Centrifugal Compressor.

AICFM_AT_012

Yuka IGA

Numerical Analysis of Influence of Gravity on Cavitation Instabilities in Cascade

AICFM_AT_013

Yusuke Shoki1, Taisuke Muryama1; 
Jiro Funaki1;  Katsuya Hirata1;

Influence of Pulsation upon Jet from an Asymmetrical Two-Dimensional Nozzle.